Nebraska Spilling Falls Water Feature

Product Code: PWFJ1613 EAN: 5060282495593

Description

Whether you choose to place it inside or outside, the Nebraska Spilling Falls Water Feature will make a great addition to any space.

There are three little pots that are spilling water into the luminous rock pool below and then from here the water is recycled back through the feature, this visual and aural display is peaceful to sit and watch.

Crafted from high quality polyresin makes this a durable, lightweight and long-lasting water feature.

Product Features:

Hand finished
Lit with white lights
Fully self-contained
Made from durable polyresin
Low maintenance and low running costs
Complete kit: water feature, pump, lights, low voltage transformer and instructions.

Product Specifications:

Height: 46cm
Width: 24cm
Length: 28cm
Weight: 6kg
Light(s): 1x Single LED

Select Your Options

Would You Like A Matching Cover?

with a Small Protection Cover (ACFCS)

Height: 103cm (3ft 5ins) Diameter: 105cm (3ft 5ins)

£12.99

Delivery Information

Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.

Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.