There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Milk Cans and Tap on Fence Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFX3520 EAN: 5060282494688
There are many different water features in the Aqua Creations range and this one could certainly be described as one of the quaintest.
Milk Cans and Tap on Fence accurately describes the scene but in no way conveys how well it is portrayed. Polyresin is a superb medium to bring such scenes to life and in so much detail.
LEDs light the water as it streams from the tap into and out of the cans, forming sparkling movement and creating an delightful spectacle.
The water is circulated around the feature by the pump that's included along with 10 metres of cable and, as it is self-contained, the feature can amuse and interest family and friends in many different locations.
Milk Cans and Tap Features:
- Suitable for both indoor and outdoor use
- Complete with mains powered pump
- 10m cable
- 3 single LEDs
- Easy installation
- Height: 60cm (2ft)
- Width: 36cm (1ft 2ins)
- Depth: 26cm (10ins)
- Weight: 7kg (15lbs 7oz)
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question