There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductLighthouse Rock Falls Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFH4519 EAN: 5060282496255



If you are looking to brighten up your home or garden then you won't find a better water feature than the Lighthouse Rock Falls.
It is made from durable polyresin that gives it all the elements of a traditional lighthouse, the cracks and hues of the tower and realistic rocks surrounding it, just as they look out at sea.
As well as this the feature provides a gorgeous display of water that trickles elegantly down the rocks into the reservoir at the bottom and back around the feature.
Lighthouse Rock Falls Features:
- Hand Finished
- Pump with 10m Cable Length
- Fully self-contained water feature
- Low voltage transformer and plug
- Suitable for indoor or outdoor use
- Low maintenance and low running costs
- Light(s): 1x Single LED
Dimensions:
- Height: 70cm (27½ins)
- Width: 35cm (13¾ins)
- Length: 38cm (15ins)
- Weight: 8kg
PDF Downloads
Fountain Assembly Instructions
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question