iGlaze Concrete Pond Neutralizer 1kg

Product Code: iGlaze EAN: 5019736710027

Write the first review

Description

An advanced neutralizing system for concrete ponds, neutralizes lime in concrete making ponds safe for fish and other aquatic life.

Ideally applied at temperatures between 5 and 25 degrees centigrade.

One the iGlaze has dried for 1 hour rain will not affect it. Total drying time is 24 hours.

Slowly dissolve iGlaze in hot water with constant stirring. Use 1 full measuring spoon (enclosed) per 2 litres of hot water. Thoroughly brush this solution over the entire concrete area. Repeat this process twice allowing 4 hours between coats and leave for 24 hours before filling the pond.

Remove surplus iGlaze from bottom of pond and flush all surfaces with clean water.

The base mixture can be reinforced with wire or fibre for added strength. Once you have constructed the pond using this mixture trowl it with a final screed which is 3 parts sand, 1 part cement and 8 spoonfuls of iProof.

 

Delivery Info

FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
 £6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.

Reviews

There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers (1)

colin thorne Asked:

I am building a koi fish pond approx. 15ft diameter x 3ft deep using concrete blocks. I was going to cement render the inside, can you advise on the next steps and products and quantities and possibly prices?

We Replied:

Dear Colin Thank you for your question. Once the cement render has dried you will need to seal it. For a pond 4.57m x 4.57m x 0.91m (15ft x 15ft x 3ft) there are roughly 37.6 square metres of surface to cover, this will require 15-20kg of pond sealant using three coats. Please follow this link to the product we recommend together with the price: /Aquatics/G4_Clear_Pond_Seal.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Thursday 01st, September, 2016

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question