Catania Water Wheel Water Feature

Product Code: PWFK7385 EAN: 5060282496262

Write the first review

Description

The Catania Water Wheel resembles a traditional Mill House and would look idyllic as a feature in your home or garden. 

This stunning self contained water feature by Aqua Creations is easy to install, you just attach the mains powered pump, fill it up and enjoy the relaxing sound of the trickling water. 

It is also supplied with an LED light which allows further enjoyment of the feature at night.

Product Features: 

  • Hand Finished
  • Pump with 10m Cable Length
  • Fully self-contained water feature
  • Low voltage transformer and plug
  • Suitable for indoor or outdoor use
  • Low maintenance and low running costs.

Product Specifications:

  • Height: 62cm
  • Width: 29cm
  • Length: 39cm
  • Weight: 9kg
  • Light(s): 1x Single LED

Delivery Information

Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.

Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.

Customer Reviews

There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

People Viewing This Product, Also Viewed