There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Carved Marble Effect Bowl Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFL1011 EAN: 5060282494381
Marvellously crafted with superb colouring, the Carved Marble Effect Bowl is a tremendous water feature that will look completely at home in many locations.
As it's self contained, neither mains water supply nor external reservoir is required. After quick installation, minimal maintenance is required on a feature that is a continuous source of interest.
This is a feature that can be a lovely table centrepiece inside the house or a focal point outside as it is both so attractive and hardwearing.
Cluster LEDs make the water glisten as it bubbles up in the centre of the bowl, adding the sight and sound of lively movement to a memorable piece.
Bowl Water Features:
- Easy installation
- Pump included
- Mains powered
- 1 Cluster LED
Bowl Feature Dimensions:
- Height: 30cm (12ins)
- Width: 41cm (1ft 4ins)
- Depth: 41cm (1ft 4ins)
- Weight: 8kg (17lbs 10oz)
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question