There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductBolena Fountain Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: GCK9653 EAN: 5060558149472
On a robust square sided column rests a wide bowl that fills with water from a central spout, this is the Bolena Fountain Water Feature that will be an impressive sight in any garden.
Sturdily constructed from glass reinforced concrete, the feature is hand finished to obtain a wonderful colour and surface appearance that references the remarkable patina of an attractively weathered piece.
Your water feature can be positioned in a large choice of locations due to the generously long power cable and a transformer that is included with the installation kit, and you'll find subsequent maintenance is minimal.
Bolena Features:
- Fully Self Contained
- Constructed From Glass Reinforced Concrete
- Hand Finished
- Complete Kit Included
- Low Maintenance
- Low Voltage Transformer & Plug
- 10m Cable
Dimensions:
- Height: 130cm (4ft 3ins)
- Width: 60cm (2ft)
- Depth: 60cm (2ft)
- Weight: 45kg
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question