Bermuda 3000 Feature Pump

Product Code: BER0083 EAN: 5016227392489

Write the first review

Description

Suitable for both indoor and outdoor water features, the robust Bermuda 3000 Feature Pump is quick and easy to install.

Similar to other pumps in the Bermuda range, the 3000 Feature Pump is sturdily made and able to be used in varied locations.

It's reliability isn't questioned and it's a pump designed to be very economical to run with low power consumption but impressive performance.

There's an excellent maximum flow rate of 3000 litres per hour that provides a pumping height of 3.5 metres, and the pump accepts 12mm, 20mm and 25mm pipes.

10m of electrical cable is included and the pump comes with a 12 month manufacturer's guarantee.

Bermuda 3000 Features:

  • Integral flow adjuster
  • 10m cable
  • Accepts 12mm, 20mm and 25mm pipe
  • Max. flow: 3000 litres per hour
  • Max. head: 3.5 metres
  • Low power consumption: 70 Watts

Bermuda 3000 Flow Rates:

  • Flow at 0.5m: 2850 litres / 627 gallons per hour
  • Flow at 1m: 2500 litres / 550 gallons per hour
  • Flow at 1.5m: 2000 litres / 440 gallons per hour
  • Flow at 2m: 1850 litres / 407 gallons per hour
  • Flow at 3m: 950 litres / 209 gallons per hour

Delivery Info

FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.

Reviews

There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers (4)

Bob Asked:

I am building a seating area and wish to operate water features either end with one pump. I'm using a plastic dustbin as the reservoir for the water: one feature will be immediately above with water being pumped through an old trombone; the second feature will be 4 metres away with water cascading down rocks into a drain area to flow back to the dustbin. I'm looking for a dual action pump but can't seem to find any help from your pump specifications. Are you able to recommend a pump system for the task?

We Replied:

Dear Bob Thank you for your question. Without knowing the overall dimensions of both features and the size of reservoir it is hard to suggest a pump. If you email the dimensions and a copy of this question to aquatics2@gardensite.co.uk we would be happy to advise you. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Wednesday 27th, April, 2016
Gary Clement Asked:

I have had a Bermuda 3000 for about 4 years but it has stopped working. Do you think that a new impeller is required as there is a lot of movement?

We Replied:

Dear Gary Thank you for your question. Yes, that might well be the cause. Please follow this link to an appropriate replacement: /Aquatics/Bermuda_Feature_Pump_Impeller_Range.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Thursday 02nd, June, 2016
keith Asked:

What are the dimensions of this pump?

We Replied:

Dear Keith Thank you for your question. The dimensions are 9.5cm wide X 12.5cm high X 12.5cm deep. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Sunday 17th, July, 2016
Brian Asked:

My Bermuda waterfall pump has failed after about 10 years. I threw it away without thinking about the model to replace it. The height is 2ft, but the water is first passed through a filter, the weir is 6 inches. Will this 3000 be an adequate replacement?

We Replied:

Dear Brian Thank you for your question. These pumps are designed to run in self contained fountains, where they will not have to deal with much debris. If you need to pass water to a filter, it is recommended that you look at a solid handling pump. As a starting point, you could look at the Hozelock Aquaforce 2500. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Connor Fisher

Friday 12th, August, 2016

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question