There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
8 Fall Slate Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFD8020 EAN: 5060282495968
The 8 Fall Slate by Aqua Creations would be an ideal accompaniment to sunny days sat outside in the garden.
The exceptional polyresin construction and luminous LED lights make this an impressive water feature to watch during the day and at night; it is also tall and narrow so will enhance those smaller spaces within your home or garden.
The water cascades over the resin rocks with a soothing sound, then it reaches the bottom pool where it is recycled back up to the top of the feature.
There is no digging required for an external reservoir because this water feature is fully self contained which also saves you time and money.
- Hand finished
- Made from resin
- 10m Cable Length
- Lit with white lights
- Fully self-contained
- Suitable for indoor or outdoor use
- Low maintenance and low running costs
- Complete kit: water feature, pump, lights, transformer and instructions.
- Length: 60cm
- Width: 53cm
- Height: 129cm
- Weight: 47kg
- Light(s): 6x Single LED's
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question