There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
4 Pots On Brick Fountain Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF8356 EAN: 5060119850199
Bricks and pots combine to great effect in this water feature that is full of detail and a marvellous spectacle. The sound of running water is very calming while the low voltage lights are fully appreciated after dark.
As it's self-contained, all that's required is an electricity supply for the pump and lights. The feature can be placed inside or outdoors as the polyresin is very resilient and frost resistant, and can be easily relocated due to its light weight.
4 Pots On Brick Features:
- High quality polyresin
- Low voltage lights
- Low voltage pump
- 10 metres of electrical cable
- inside or outdoor use
- Height: 119.5cm (47ins)
- Width: 51.5cm (20ins)
- Depth: 51cm (20ins)
- Weight: 40kg (88lbs)
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
£419.99 inc. VAT
Sorry, this item is out of stock.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
I was bought this feature in 2009 . It is lovely but over time the bulb housings have rotted despite being rubber & enclosed in glass casing . Now none of the lights work. I can find the bulbs but I need to replace the whole wiring unit with 4 cables & bulb holders. Are these available as spare parts ?We Replied:
Dear Mrs Scott Thank you for your question. We can supply the complete lighting replacement for this fountain. Please call our customer care team on 0121 355 7701 and we would be happy to assist and take an order. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards David CotonSunday 12th, July, 2015
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question