There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Halls Hobby 10ft x 8ft Traditional Cabin Style Garden Shed
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
A Hobby 10ft x 8ft Cabin Style Garden Shed offers you the best of both worlds, as a cabin it will be extremely pleasant to sit outside during the summer, alternatively as a shed it is light enough to work inside and can also be used for storage.
However you choose to use this attractive structure, and it could be a combination of both, it's reassuring to know that the build quality is so high.
You will immediately notice the Scandinavian FSC cladding and the zinc door fittings. The windows, two at the front and two at the side, are fixed and glazed with horticultural glass that lets light stream inside.
An overhanging roof gives it a real cabin feel, especially if the optional verandah is installed. You will then have a multi-functional garden building where you can work, rest and play.
Hobby Cabin Style Shed Features:
- Scandinavian FSC timber cladding
- Overhanging roof
- Key operated lock
- Fixed (non opening) glass windows
- Glazed with horticultural glass
- Base coat treated with high quality preservative
- High quality roofing felt
- Verandah option
- Tongue & Groove wall and floor cladding
- All framing corners are rounded off
10ft x 8ft Hobby Shed Dimensions:
- Nominal size: 10ft x 8ft (3.05m x 2.49m)
- Framing: 38mm x 50mm (1½ins x 2ins)
- Eaves height: 1680mm (5ft 6ins)
- Ridge height: 2280mm (7ft 6ins)
- Front windows: 610mm x 610mm (2ft 0ins x 2ft 0ins)
- Side windows: 610mm x 610mm (2ft 0ins x 2ft 0ins)
- Roof overhang (if no veranda): 305mm (1ft 0ins)
- Door: 1765mm x 762mm (5ft 10ins x 2ft 6ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Important: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: email@example.com.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£899.00 inc. VATIn Stock