There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
9ft x 4ft Tool Store
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
With a door that can fitted at either or both ends, or the front, and can be upgraded to double doors, you can tell how well designed this 9ft x 4ft tool shed is.
Looking after your garden tools and equipment will keep them in good order, and this tool store has lots of room for spades, forks, hoses, mowers and lots more. Very well built, the doors are fitted with zinc hinges and D handle.
The store can be locked to secure whatever is inside, protecting them from the worst of the weather.
Tool Store Features:
- Very compact
- Practical design
- Zinc hinges and D handle
- Lock & key
- Tongue & Groove wall and floor cladding
- Dip treated
- All framing corners are rounded off
9ft x 4ft Tool Store Dimensions:
- Nominal size: 9ft wide x 4ft deep (2.74m x 1.22m)
- Framing: 38mm x 50mm (1½ins x 2ins)
- Eaves: 1610mm (5ft 3ins)
- Ridge: 1710mm (5ft 7ins)
- Door: 1460mm x 762mm (4ft 9ins x 2ft 6ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: firstname.lastname@example.org.
Choose the positioning of your door from one of the following. NOTE The double door options are at an extra cost.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£435.00 inc. VATIn Stock