There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
20ft x 10ft Heavy Duty Pent Garden Shed
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
With 200 sq ft of floor space, the 20ft x 10ft Heavy Duty Pent Shed from Hall's offers many possible uses. It's a high quality structure that is good to look at, secure and substantial, dry and generously sized.
Strength is gained from 50mm framing and cross bracing that augment the traditional techniques that are used in the shed's construction including the tongue and groove roof and floor.
Coach bolting and galvanised nails are used in preference to pins and staples, and chipboard is discarded in favour of timber. It's not difficult to discern that this is a shed built by manufacturers who have great experience of garden buildings and have put this knowledge into effect.
Oil based preservative has been used to treat the shiplap cladding that enhances the shed's outward appearance and three Georgian style windows are practical as well as attractive. Light streams through the horticultural glass and one of the windows opens to ventilate the pleasant interior.
Double doors are probably most appropriate for this size of shed and, like the standard 3ft single door, will be braced and fitted with zinc hinges and a rim lock.
Heavy Duty Pent Shed Features:
- Glazed with horticultural glass
- Shiplap cladding
- Tongue and groove floor and roof
- Joinery windows
- Zinc coated hinges
- Base coat treated with high quality preservative, with antifungal treatment
- Traditional coach bolt assembly (no pins or staples)
- Galvanised nails
- No chipboard
- High quality heavy duty roofing felt
- Rim lock and door knob
- All framing corners are rounded off
20ft x 10ft Heavy Duty Pent Shed Dimensions:
- Nominal size: 20ft width x 10ft depth (6.09m x 3.05m)
- Framing: 50mm x 50mm (2ins x 2ins)
- Eaves height: 1937mm (6ft 4ins)
- Ridge height: 2153mm (7ft 1in)
- Georgian windows: 610mm x 457mm (2ft 0ins x 1ft 6ins)
- Door: 1880mm x 914mm (6ft 2ins x 3ft 0ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: email@example.com.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£2,317.51 inc. VATIn Stock