There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Sorry this product has been discontinued. Stainless Steel Range
3 Inverted Stainless Steel Columns (Sump) Fountain Water Featurehttp://databaseimages.gardensite.co.uk/_original.jpg http://www.gardensite.co.uk/archive/Aquatics/3_Inverted_Stainless_Steel_Columns_Sump_Fountain_Water_Feature.htm Hamac / Aqua Creations Premier
Product Code: PWF5163DA
Self Contained Water Feature for Your Home or Garden
Water is a dynamic, light enhancing addition to any landscape.
The relaxing, peaceful and tranquil qualities of water, have inspired many ancient and modern garden designs. With this in mind, this beautifully designed and low priced water feature has been carefully selected by us, for your attention. So you can buy with confidence.
This 3 Inverted Stainless Steel Columns (Sump) Fountain Water Feature is:
Dimensions : Length 60cm x Width 47cm x Height 111cm
Delivery is inclusive to all UK mainland destinations.
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question