Easy to use web site with accurate information
Found the item I required very easily, all the information was to hand for me to decide. Good communications and fast delivery. can't fault them at all.
These are the greenhouse clips that allow you to succesfully overlap panes of glass when in a vertical position in a greenhouse wall or roof.
I'm not sure why these are called Z Clips as they are more S shaped as far as I can see. What they do, however, is not in doubt as they enable you to position one piece of glass on top of another to build the necessary wall of glass that you need for a greenhouses. These Z Clips are pre-formed so dictate the amount of overlap where the glass above overlaps in front of the one below. As water can't run uphill between the overlapping panels they also guarantee you keep dry inside the greenhouse, whatever the weather is doing outside.
As can be noted on the packaging, these clips will fit the Halls, Eden, AGL, Botanica and Juliana ranges of greenhouses. They are 14mm long x 9mm wide.
Fitting Z Clips is easy. You have to put the bottom panel of glass in first and hold this in place with Spring Clips (also known as W Clips). Drop two Z Clips on top of the glass facing outwards creating the support to hold the next section of glass in your wall. Traditionally they are placed about 6-8ins in from either side though the positioning is not critical. What is important is to make sure they are all the same distance in as you build the wall otherwise they can quickly look unsightly.
Fast mainland UK delivery. We also send these clips out around the world, so if you are not in the UK please use the QUESTIONS & ANSWERS tab near the foot of this page and request a postage quote.
Should you require any additional information please feel free to call us, 7 days a week on 0121 747 3046.