There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Puppy at Tap Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF3431 EAN: 5060282494817
This water feature charmingly depicts an adorable puppy watching intently as water streams from a tap into a waiting metal bucket.
The Puppy at Tap is a wonderful scene, sympathetically portrayed in great detail. Extra interest is created by the cluster LED that will transform the scene after dark.
It's your choice whether to position the water feature on the patio or inside the house. Perhaps, as there's 10 metres of cable and it's self contained, you will choose to move it to suit different occasions.
Puppy at Tap Features:
- Indoor and outdoor use
- Low maintenance required
- Low voltage
- Easy installation with supplied instructions
- Complete with pump
- Cluster LED
Puppy at Tap Dimensions:
- Height: 67cm (2ft 2ins)
- Width: 36cm (1ft 2ins)
- Depth: 33cm (1ft 1ins)
- Weight: 8.5kg (18lbs 11oz)
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£139.99 inc. VATIn Stock