Portland Stainless Steel Water Feature

Product Code: WSS0590 EAN: 5060282494923

Write the first review


Portland in Oregon is a famous timber producing area but none of that particular traditional product is used in the Aqua Creations water feature that takes the name of that city.

Instead modern shining stainless steel is paired with sparkling water to create the Portland Stainless Steel Water Feature which is strikingly contemporary in both design and manufacture.

You decide on its best location, whether inside or out, this is a feature that will only enhance both interior design and garden landscape with its appearance and characteristics that emphasize glistening movement and the relaxing sound of flowing water.


Portland Features:

  • Indoor and outdoor 
  • Stainless steel
  • Mains powered pump
  • 10m cable
  • Easy installation

Portland Dimensions:

  • Height: 90cm (2ft 11ins)
  • Width: 17cm (7ins)
  • Depth: 8cm (3ins)
  • Weight: 6kg (13lbs 4oz)

Austin Key Features:

  • Modern design
  • Suitable for both indoor and outdoor use
  • Constructed from stainless steel
  • Complete with mains powered pump
  • 10m cable included
  • Easy installation with instructions supplied

Austin Dimensions:

  • Height: 40cm (1ft 4ins)
  • Width: 17cm (0ft 7ins)
  • Depth: 8cm (0ft 3ins)
  • Weight: 3kg

Delivery Info

FREE UK DELIVERY on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for certain locations for example Isle of Wight.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.


There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question