Balancing Fern Leaf Bowls Water Feature

Product Code: PWFS2688 EAN: 5060282494633

Write the first review


Whether the Balancing Fern Leaf Bowls Water Feature has an artistic New Zealand origin is open to question, what isn't problematic is that these black bowls with fern decorations are an intriguing sight.

Balanced somewhat perilously on each other, water streams to the large bowl and is then returned to the top. As the feature is self-contained there's no need for an external water supply.

Two LEDs light the way, making the water glisten after dark, so you have the magical combination of light, sound and movement .

Installation is a simple procedure, just follow the instructions, there is a pump and 10 metres of cable attached, so the feature can be placed in many different locations and is very mobile.

Fern Bowl Features:

  • Constructed from polyresin
  • Indoor and outdoor use
  • Mains powered pump and 10m cable
  • Lit by LEDs
  • Easy installation 

Fern Bowl Dimensions:

  • Height: 62cm (2ft 0ins)
  • Width: 38cm (1ft 3ins)
  • Depth: 35cm (1ft 2ins)
  • Weight: 8kg

Delivery Info

FREE UK DELIVERY on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for certain locations for example Isle of Wight.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.


There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question