There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Stainless Steel Pillar In Semi-Circle Fountain Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF0676DA EAN: 5060119854326
A self-contained fountain which combines stainless steel and high-quality resin to create a beautiful feature, with LED lights that create a beautiful sight which can be viewed day or night.
Made from high-quality heavy-duty resin and stainless steel this feature can be moved with ease if required but is heavy enough to stand in place without being knocked over. Please view the video below to see the water feature working.
In the box:
- Water feature
- Stainless steel pillar
- Low voltage Set of LED lights
- Low voltage pump with 10 metres of electrical cable
- Height 85cm (2ft 8ins)
- Width 35cm (1ft1ins)
- Depth 41cm (1ft 3ins)
- Weight: 19kg.
- 92cm x 41.5cm x 48cm
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers (1)
You mention in many of the product descriptions for self-contained water features that a low voltage pump is included but there is no mention of a transformer to reduce the mains voltage. Does this have to be purchased separately?We Replied:
Dear Dave Thank you for your question. Any features that mention a low voltage pump will also be supplied with the correct transformer. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Andy HobsonTuesday 22nd, April, 2014
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£179.99 inc. VATIn Stock