There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Riga Stainless Steel Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: WSS8939-75 EAN: 5060282490741
One of the larger sphere water features, it has the same qualities as others in the range. Water sparkles in the sunshine during the day, and is then delightfully captured by the cluster LED during the evening.
Self-contained, it can be positioned inside your home as an intriguing feature or in the garden as an accent piece. It can also be easily relocated depending on your mood and circumstances.
Riga Stainless Steel Features:
- Suitable for use outdoors or indoors
- Cluster LED
- Made from high quality stainless steel
- Lightweight enabling
- 10m cable
Riga Stainless Steel Dimensions:
- Height: 86cm (34ins)
- Width: 75cm (30ins)
- Depth: 75cm (30ins)
- Weight 12kg (27lbs)
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£499.99 inc. VATIn Stock