Large Slate Stack Water Feature

Product Code: PWF8472-L EAN: 5060119852070

Write the first review


A substantial focal point in any landscape, the Large Slate Stack water feature could easily be taken as a solid piece of Welsh slate, however in reality it's lightweight and very hardwearing polyresin. 

Tremendously realistic, the water feature's outstanding qualities are highlighted by low voltage lighting. Water streams over its surface, returning to the top to create a reassuring continuum of tranquillity. 

Large Slate Stack Features:

  • High quality polyresin
  • Low voltage lights
  • Low voltage pump
  • 10 metres of electrical cable
  • Self-contained

Large Slate Stake Dimensions:

  • Height: 143.5cm (57ins)
  • Width: 87cm (34ins)
  • Depth: 59cm (23ins)
  • Weight: 66kg (145lbs)

We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.

The best way to protect your fountain is to use a protection cover.

Delivery Info

Our prices include VAT and delivery anywhere within mainland UK* including Northern Ireland and Southern Ireland on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for the below postcodes/locations:

*AB, DD, EC, GY, IM, IV, JE, KW, PH, WC, PA, PO 30-41, SE1, SE11, SW, W, N, NW, E (Excluding E4) and Republic of Ireland.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of teh pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.


There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question