Hozelock Bioforce Revolution 6000 Pressurised Filter and Pump Kit
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 1402 EAN: 5010646055185
In Stock
Buy now, pay later with PayPal Credit
Free mainland UK delivery
Delivery normally within 2 - 3 working days.
Description
A pressurised pond filter that makes maintenance of your pond quick and easy, you will not need to get your hands wet or dirty. All you will need to do is switch the button and wind the handle.
Complete with an Aquaforce solids handling pump, this kit makes it easy for you as the pump is optimally matched to the filter unit. All you will need is piping and clips!
Pre-assembled for quick installation with a new pond or a current filtration system. You can hide the unit at the side of your pond, or bury it up to the level of the inlets. The pressurised filter allows for water to be pumped to a higher point than itself.
Using both biological and mechanical filtration, the biological filtration consists of Kaldnes K3 media which accomodates beneficial bacteria and the mechanical filtration works using foam cubes which gives increased surface area.
To use the unique winding handle, all you will need to do is use the diverter valve to send the water to surrounding areas in the garden, when you use the handle it will activate paddles inside the chamber which agitates the foam cubes loosening sludge sending it out of your filter.
- Never look at an illuminated UV lamp as this can damage the eyes.
- We advise to change the lamp once a year as UV Output will diminish over this period and the bulb may still illuminate but will not work efficiently.
- Filter dimensions: 385mm Diameter x 545mm Height (includes handle).
For a more personalised overview of this product why not read David Coton's informative blog by clicking here: Review of the Hozelock Bioforce Revolution Pond Filter
Product Spec:
- For ponds up to 12000 litres / 2640 gallons.
- Or 6000 litres / 660 gallons with fish.
- Aquaforce 4000 Pond Pump
- 18 Watt UVC Lamp.
- 25-40mm Inlet and Outlets.
- Recommended Pump Size of 4000 LPH / 880 GPH.
- Unique winding handle.
- Diversion valve.
- K3 media & foam cubes.
Delivery Information
Fast Free UK Delivery on orders over £60.00.*
Smaller orders under £60.00 are subject to a £4.95 delivery charge. Delivery will typically be made within 2 - 3 working days but may be extended during peak times.
We Can Offer Next Day Delivery for £7.95*
To meet our deadline for this service you must order before 11.00am to ensure delivery for the next working day. This excludes weekends and bank holidays.
*Extra charges or restrictions will apply to certain UK postcodes. These include parts of Scotland, The Highlands, Northern Ireland and offshore Isles. Please note Next Day delivery is not available to these locations. Please click here for a full list of postcode exclusions and contact us today for a personalised quote.
Customer Reviews
There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductQuestions and Answers (5)
Steve Cliff Asked:
Due to the way my garden/pound is laid out, the inlet/outlet on the Bioforce Revolution 6000 may be 2-3 inches below the waterline. Would it continue to work?
We Replied:Dear Steve Thank you for your question. This will be fine as it's a pressurized unit. The filter can be situated outside the pond but below the water line level. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul Ilsley
Tuesday 24th, June, 2014
John Asked:
Will a Hozelock Bioforce 6000 pump water up 4 feet back into a pond?
We Replied:Dear John, Thank you for your question. Yes, this will pump has a maximum head height of 2.5 mtrs (8ft). Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Dan Everton
Thursday 08th, October, 2015
John Asked:
How soon after putting a new pump and filter in a new pond can I safely put in fish?
We Replied:Dear John, Thank you for your question. We would recommend leaving the pond for around 2 weeks before putting fish in. We would also suggest testing the water with one of these kits: https://www.gardensite.co.uk/Aquatics/Pond_Test_Kits/ Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Dan Everton
Wednesday 14th, October, 2015
Essy Asked:
Is a 1352 kit suitable for a 1000 litre Blagdon preformed pond?
We Replied:Dear Essy Thank you for your question. This will be well suited to a koi pond of that size. You can never over filter a pond, and with such a large filter you should have crystal clear water. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton
Saturday 19th, March, 2016
Safira Asked:
Which clips (inc.product codes) and what length of pipe are required?
We Replied:Dear Safira Thank you for your question. The pipe and clips depend on your choice as you have 3 sizes of pipe to pick from.- 25mm 32mm and 40mm. 32mm would be a standard choice: https://www.gardensite.co.uk/Aquatics/Black_Corrugated_Hose_32mm_1_14ins_per_metre.htm https://www.gardensite.co.uk/Aquatics/Lotus_Metal_Hose_Clips.htm How much pipe depends entirely on what length you require to get from the pump to the filter and from the filter back to the pump. A length for the dirty water outlet is optional. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton
Sunday 04th, September, 2016Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question
