Cherubs Holding Bowl Water Feature

Product Code: PWF1676 EAN: 5060282490062

(4.3) Based on 1 Review


This is both a very substantial and ornate fountain. Of the two cherubs, one holds aloft a petalled bowl while the other reclines under the shower of water. 

Self-contained and crafted from polyresin, the main bowl is gadrooned and has a bulbous stem decorated by acanthus leaves. This would not be out of place in a stately home or palatial surroundings.

Cherubs Holding Bowl Features:

  • Self-contained
  • Polyresin
  • Low voltage LEDs
  • Low voltage pump 
  • 10 metres of electrical cable

Cherubs Holding Bowl Dimensions:

  • Height 123cm (48ins)
  • Width 65cm (26ins)
  • Depth 65cm (26ins)
  • Weight: 24kg (53lbs)

We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.

The best way to protect your fountain is to use a protection cover.

Delivery Info

Our prices include VAT and delivery anywhere within mainland UK* including Northern Ireland and Southern Ireland on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for the below postcodes/locations:

*AB, DD, EC, GY, IM, IV, JE, KW, PH, WC, PA, PO 30-41, SE1, SE11, SW, W, N, NW, E (Excluding E4) and Republic of Ireland.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of teh pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.

Reviews (1)

Looks Very Good But

  • Delivery: Five Stars
  • Quality: Four Stars
  • Price: Four Stars

I have placed this water feature in the corner of my garden and it totaly compleates the garden . Looks great the only problem is that although I have got the water turned down as low as possible it still splashes out and also the wind will blow the flow of water away , it does mean that it has to be filled every day even though I have it on a timer so it goes off at night .

By Mr L Wilkins , written on Saturday 04th, June, 2016.

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question