There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Buddha on Wall Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFD9049-2 EAN: 5060119859949
A remarkable portrayal is the centrepiece of this impressive and substantial Buddha on Wall water feature, and it's a marvellous way to introduce an element of the orient into your garden or home.
Self-contained, water is pumped up to the top header pool and then flows back over the Buddha's face into the bottom reservoir.
No water supply is therefore required, just mains electricity.
Polyresin is a highly durable material, so the water feature can be left outside during the winter, and LEDs further enhance its beauty.
Buddha on Wall Features:
- Low voltage LEDs
- Low voltage pump
- 10 metres of electrical cable
- Polyresin construction
Buddha on Wall Dimensions:
- Height: 102cm (40lbs)
- Width: 69cm (27ins)
- Depth: 35cm (13lbs)
- Weight: 29.5kg (63lbs)
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.
The best way to protect your fountain is to use a protection cover.
£4.95 delivery on orders under £50.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of teh pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers (1)
Can this be used as an indoor feature? What's the weight with the water?We Replied:
Dear Dev Thank you for your question. As this feature is self-contained and needs no external water supply (you just fill the base when setting up), it can either be used indoors or outdoors, whichever your prefer as long as you have a mains plug socket nearby. The weight is around 30kg. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Andy HobsonTuesday 11th, August, 2015
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£349.99 inc. VATIn Stock