There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Blagdon Midipond 10000 Biological Filter
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 1010559
A 7 stage filtration process makes this one of the best pond filters on the market.
Producing crystal clear, clean pond water for you and your aquatic life to enjoy.
With a stainless steel hydro screen prefilter, a venturi fed aeration chamber.
Using high output power compact 18w or 24 watt lamps and a high capacity biological capacity suitable for use with any biological media.
Maximum flow rate of 8000 litres per hour, maximum pond size of 10,000 litres or 5,000 litres with fish.
- Optional 2/3/4 x 1 1/2" Outlets
- 2 x Outlet Blankets Included
Filter box transparent for illustrative purposes only, actual filter will be opaque.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (3)
Can i buy spares for this system e.g. outlet nut and O ring?We Replied:
Dear Robert Thank you for your question. In this case we would recommend calling Blagdon direct on 01306 873 818 as they will be able to source any spares. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonThursday 25th, June, 2015
What are the dimensions of the Midipond 10000?We Replied:
Dear John Thank you for your question. The product dimensions are approximately: 53.4 x 43.8 x 43.2 cm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonFriday 06th, May, 2016
I have fitted new filter sponges and made sure my filter is level but it is still overflowing what can I do?We Replied:
Dear Brian Thank you for your question. As the foams are new they are not as porous as the old ones and means water can not pass through as quickly as the older foams. We would suggest squeezing the foams in the pond and soaking them for an hour or too then retry. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 15th, August, 2016
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£169.99 inc. VATIn Stock