2 Buckets on Bricks with Tap Fountain Water Feature

Product Code: PWF5069 EAN: 5060119857709

Write the first review


A partially rendered wall provides the backdrop to this marvellously quirky water feature. With various elements includng a tap and two buckets, it can be placed decoratively on a patio, in the garden or in fact inside the house.    

Made from highly detailed polyresin, which is superbly moulded, the water streams from a smaller bucket perched on a stool into a larger one. Illuminated by LEDs, the water feature just needs an eletricity supply.

2 Buckets on Bricks with Tap Features:

  • Self-contained
  • Indoor or outdoor use
  • Durable Polyresin
  • Low voltage lights
  • Low voltage pump
  • 10 metres of electrical cable

2 Buckets on Bricks with Tap Dimensions:

  • Height: 52cm (21ins)
  • Width: 28.5cm (11ins)
  • Depth: 27cm (11ins)
  • Weight: 12kg (27ins)

We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.

Please view the video below to see the water feature working.

The best way to protect your fountain is to use a protection cover.

Delivery Info

FREE UK DELIVERY on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for certain locations for example Isle of Wight.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.


There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question